RATTAN IRON WORKS (RIW) is a leading Screw suppliers in Chawri Bazar, Delhi with a minimum 40 years of expertise in Screws. Reach Us Today +91-9911251063 for the guidence of picking the perfect type of Screw for the job.
The process of selecting the perfect Screw for any application is a fragile part of the success and failure of any particular product or task. So today we will discussed on how to choose the perfect type of Screw for any job or application. There are three major factors to determine this and they are:
A) Basic Types Of Screws
The style of a screw directly determines its act. This includes the style of the screw itself and more. Although there are dozens of different types of screws, there are three generic ones that get the extreme use. They are the following:
A.1) MACHINE SCREWS: Typically Machine Screws are designed to be fastened to an existing tapped hole on a metal surface, usually in conjunction with a corresponding nut. Extensively used in multitude of industries including electrical, electronic consumer appliances, switch gear, automobile ancillaries, watch & Mobile phones manufacturers.
A.2) STEEL SCREWS: Steel Screws have a fully threaded crus with sharp threads and tip that allow them to cut through metal, wood, plastic, and various other materials.
A.3) WOOD SCREWS: A Wood Screw with a sharp point designed to attach two pieces of wood together. A wood screw generally has a partially unthreaded fragment below the head. The unthreaded fragment of the crus is designed to slide through the top board (closest to the screw head) so that it can be pulled tight to the board to which it is being attached.
As you can discern by the names of the most generic screws, it’s easy to allocate what application to use these screws in. But there are other constitute that factor into choosing the perfect type of screw, including size and length.
B) Screw Thickness & Loadability
The thickness of a screw is enormously crucial. This determines how much your screw can efficiently clasp or anchor. For a safe and accurate application, the screw thickness needs to function for the width of the material you’re placing the screw into, in addition to the weight it will have to support.
However, keep in mind it’s not always that ingenious. If your load is 80 pounds, a screw that can clasp 80 pounds will simply not adequate. The tightening of the screw during application needs to be factored into the total load capability, as well. Make sure that the pre-sinker is at least twice the weight of any external loads to reduce risk.
C) Screw Length
When choosing a screw length it’s crucial to commit to memory that the nail should always be three times as long as the thickness of the material in which it will be driven into. To quest this: hold the screw up against the piece you’re putting it through and select a nail almost three times the thickness.
TIPS AND COUNSEL
- Wood has a tendency to echeloned when you drive a screw into it. Pre-drill a hole slightly parochial than the thickness of the screw’s shaft and drive the screw into it.
- Stratum the threads with generic bar soap before driving into wood. The soap acts as a lubricant to reduce friction as the screw drives in.
For more tips get in touch with RATTAN IRON WORKS (RIW) the leading screw suppliers in Chawri Bazar, Delhi.
Thanks
RATTAN IRON WORKS (RIW)
Mr. Vaibhav Jain
+91-9911251063
info@rattanironworks.com